Gear Milling of Cylindrical Wheels by Shaping Method without Coolant

Authors

  • Mamadjanov Alisher Tashkent State Technical University
  • Negmanov Gayrat LLC «Texnolog» operator-programmer
  • Sirojidinov Shamilidin Tashkent State Technical University
  • Radjabova Nargiza Tashkent State Technical University

Keywords:

gear milling, worm milling cutter, cutting and cooling fluid, cutting speed, axial feed

Abstract

The article discusses gear milling of cylindrical gears with external engagement using the rolling method with worm cutters without the use of coolant and the conditions of experimental studies, as well as machining with a worm cutter made of powder high-speed steel. Optimum cutting conditions and the achievable accuracy of cylindrical gears are given.

Downloads

Published

2025-01-25

How to Cite

Alisher, M., Gayrat , N., Shamilidin, S., & Nargiza , R. (2025). Gear Milling of Cylindrical Wheels by Shaping Method without Coolant. Web of Semantics : Journal of Interdisciplinary Science, 3(1), 48–54. Retrieved from https://web.semanticjournals.org/index.php/wos/article/view/691

Issue

Vol. 3 No. 1 (2025): Web of Semantics : Journal of Interdisciplinary Science

Section

Articles

Similar Articles

You may also start an advanced similarity search for this article.